Technician A says that employers must inform their employees about any hazardous chemicals used in the work place by using Material Safety Data Sheets. Technician B says that the work place Hazardous Materials Information Systems is the Canadian version of the Material Safety Data Sheets. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
C
You might also like to view...
What is required by the symbol shown in Figure 1?
a. Pre-weld testing on the other side of the joint
b. Pre-weld testing on the arrow side of the joint
c. Post weld testing on the other side of the joint
d. Penetrant testing on the arrow side of the joint
e. None of the above
18.4 รท 8 =
A) 2.23 B) 2.3 C) 2.03 D) 2.2
Four resistors are connected to a 12-volt battery source in series. The values of the resistors are 10 ohms, 100 ohms, 330 ohms, and 470 ohms. Technician A says that the greatest voltage drop will occur across the 10-ohm resistor. Technician B says that the greatest voltage drop will occur across the 470 ohm resistor. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
The electrical terminals used for airbag systems are unique because they are plated with which of these metals?
A) Tin plated heavy-gauge steel B) Solid copper C) Gold plated D) Silver plated