A 10-ft-long stud was installed in position when the wood's moisture content was 19%. During a long dry spell, the wood's moisture content became 8%. The new stud length will be
A) approximately 9 ft 10-1/2 in.
B) approximately 9 ft 11 in.
C) approximately 9 ft 10 in.
D) approximately the same as the initial stud length of 10 ft.
E) none of the above.
D) approximately the same as the initial stud length of 10 ft.
You might also like to view...
In a circuit with light bulbs connected in parallel, if one light bulb burns out, all of the light bulbs will fail to light.
Answer the following statement true (T) or false (F)
The floral foam used in floral design _____
A) needs soaking for 20 minutes B) needs to be secured to the pot with florist tape C) is punched with holes for the flowers D) none of the above
A flex-fuel vehicle uses the PCM to make adjustments to the engine according to the percentage of ethanol in the fuel. The PCM must adjust which engine settings?
A) Ignition timing B) Quantity of fuel delivered C) Both A and B D) Neither A nor B
A layer that is not defined in the OSI network model is ________
A) network B) presentation C) physical D) application