For a passive component attachment by a mod wire, it should enter onto the pad and termination area at a(n) ____________________ angle and lay across the width of the termination.
Fill in the blank(s) with the appropriate word(s).
right
You might also like to view...
What are notes?
What will be an ideal response?
How are furnace clearances determined?
What will be an ideal response?
The solder most commonly used on low-pressure copper fittings is made from _____
a. 100% lead b. 50% tin/50% silver c. 95% tin/5% antimony d. 45% silver/25% zinc/30% copper
A common model for a practical inductor is a coil resistance in series with an inductance L. The coil resistance accounts for the internal losses of an inductor. Figure P4.53 shows an ideal capacitor in parallel with a practical inductor. Determine the current supplied by the source vS . Assume:
vS (t) = Vo cos(?t + 0)
Vo = 10V ? = 6Mrad/s RS = 50 ?
RC = 40 ? L = 20?H C = 1.25 nF
