To minimize the load’s movement when traveling a crane with a suspended load over unlevel ground, _____.
a. the lift cable should be as long as possible
b. the load should be snubbed
c. the boom should be as near vertical as possible
d. the boom should be lowered as much as possible
b. the load should be snubbed
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. A PLC system offers many advantages over a relay-based control system except that it can be difficult to implement. 2. Volatile memory will lose its programmed contents if operating power is removed or lost. 3. In industrial applications where the PLC will replace the relay logic circuit, the operator controls and process switches will generally remain as they are wired. 4. Manual motor starters are used extensively on industrial machines. 5. In thermal protected overload relays, the thermal element is connected mechanically to a normally open contact.
____________________ cutting does not put any heat into the material being cut, and it is this lack of heat input that makes this process unique.
Fill in the blank(s) with the appropriate word(s).
Find the Thevenin equivalent at terminals a-b of the circuit in Fig. 10.104.
 FIGURE 1.png)
Identify the two refrigerant lines that are attached to the compressor.
A. The exhaust and intake lines B. The suction and discharge lines C. The turbo and induction lines D. The liquid and vapor lines