Find the area of a trapezoid in square centimeters with height of 1.1 cm, base1 equal to 3.2 cm and base2 equal to 4.5 cm to two decimal place.

A. 3.56
B. 8.47
C. 4.24
D. 5.77


Answer: C

Trades & Technology

You might also like to view...

Calculate the output voltage due to the summing amplifier shown in Fig. 5.75.

Trades & Technology

Technician A says that the torque converter should be separated from the flex (drive) plate before removing the automatic transmission/transaxle. Technician B says that the clutches should be installed "dry" when replacing the frictions and steels in a clutch pack. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B

Trades & Technology

If input A of a NAND gate is connected to a clock and input B is HIGH, the normal output is

A) a clock signal. B) an inverted clock signal. C) HIGH. D) LOW.

Trades & Technology

To obtain complete voltage control, the triac, like the SCR, must be ____________________.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology