To show that the service facility wants to do a good job for the first time customer, which form(s) might be completed?
A. Maintenance Inspection Form and Safety Inspection Form
B. Special Invoice
C. Daily Labor Report and Repair Order Tracking Sheet
D. Repair Order Tracking Sheet and Safety Inspection
A. Maintenance Inspection Form and Safety Inspection Form
You might also like to view...
When unloading bundles of pipe, _____.
a. set the bundles directly on level ground b. set the pipe on hardwood blocks to keep the pipe off the ground c. stack the bundles if at all possible d. use a chock at least 6" tall to keep pipe from rolling
What do technicians call the temperature at which water vapor begins to condense out of the air?
A) Wet-bulb temperature B) Specific humidity C) Dew point D) Enthalpy point
What is the primary purpose of the low-pressure control in a heat pump?
a. Cycles compressor off on low loads b. Prevents refrigerant floodback c. Protects against loss of charge d. Prevents outdoor coil icing
Reinforcement must be installed accurately as shown on the _____
a. specification sheets b. placing drawings c. detail drawings d. floor plan