If the measurement on a drawing is 1 inch and the scale is 3/8 inch equals 3 feet, the actual measurement of the drawing is 8 feet.
Answer the following statement true (T) or false (F)
True
You might also like to view...
Find, in inches, the length of 1/4” plate needed to form this semicircular ventilation section. The inside radius is 9 1/2”.
Mixed format: 
(with a space between the whole number and the numerator)Fraction format: 
Reduce all fractions. The ceiling outlets on a residential job weigh an average of 
pound each, and 12 are required. Find the total weight of the outlets.
Fill in the blank(s) with the appropriate word(s).
The direct current that is an input to the alternator's rotor is the _____ current.
A. excitation B. starting C. synchronizing D. initiating
Which of the following is a true statement about rigging hardware?
a. Shouldered eyebolts are not acceptable for lifting operations. b. Screw-pin shackles require a cotter key to be installed in the end of the pin. c. Serrated-jaw clamps are the only type of hardware that needs no rated load information. d. Plate clamps are designed to lift only one plate at a time.