The fitting found on an accumulator is for which of the following?
A) High-side service
B) Leak detection
C) Flushing
D) Pressure switch
D) Pressure switch
You might also like to view...
For a(n) ____________________, the section of the area to be examined is shown circumscribed by broken lines with circles at the connecting points.
Fill in the blank(s) with the appropriate word(s).
Solve the following problem and if necessary round answer to two decimal place: 
.
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1. Two-stroke power equipment engines are becoming more prominent in the power equipment engine industry. 2. Two-stroke engines in today’s power equipments are found primarily in small handheld units such as gas-powered blowers and string trimmers. 3. If the piston rings in a two-stroke engine are worn, the compression gauge displays a pressure reading that is higher than the manufacturer’s specification. 4. When looking at the reed valve assembly, there should be little to no air gap between the reed valve and the reed valve seat. 5. After an engine has been rebuilt, the engine should start within 10–15 pulls of the starter rope.
The hole drilled in sheet metal for a tapping screw should be the approximate size of ____.
A. the thread diameter B. the thread root diameter C. the shank diameter D. none of the above