The most common types of single phase compressor motors are:
A) Split phase capacitor (SPC), capacitor start (CS), capacitor start/capacitor run (CSR), and semi-permanent split capacitor (SPSC)
B) Capacitor run (CR), permanent split capacitor (PSC), and capacitor start (CS), and shaded pole types
C) Split phase capacitor (SPC), semi-permanent split capacitor (SPSC), capacitor start (CS), and shaded pole types
D) Permanent split capacitor (PSC), capacitor start (CS), capacitor start/capacitor run (CSR), and split phase
D
You might also like to view...
What is the concentration of dissolved solids (as NaCl) in the combined stream downstream of the discharge
A soft drink bottling plant discharges a wastewater with a dissolved solids concentration of 10,000 mg/l NaCl, at a rate of 100 gal/min to a stream. The stream above the discharge has a volumetric flowrate of 1.0 MGD and a dissolved solids concentration of 25 mg/l. Below the discharge point is a prime fishing spot, and the fish are intolerant of salt concentrations above 200 ppm. What will be an ideal response?
What are the five leading causes of work deaths?
What will be an ideal response?
If a hydraulic system has pistons of different sizes and force is applied to the smaller piston, the force at the
larger piston is _____. a. greater b. smaller c. the same d. half as much
Why are powers of 10 used to express numeric values in scientific and engineering work?
What will be an ideal response?