What are the five types of tolerance zones that may be used with a profile tolerance?

What will be an ideal response?


ANS:
There are five types of tolerance zones that may be used with a profile tolerance.
1. Bilateral tolerance zone (equally disposed)
2. Bilateral tolerance zone (unequally disposed)
3. Unilateral tolerance zone (outside of material)
4. Unilateral tolerance zone (inside of material)
5. Non-uniform tolerance zone

Trades & Technology

You might also like to view...

Mr. Gamez has 180 pecan trees. He had a yield of 52 pounds of pecans per tree. Three-fifths of the pecans are sold as shelled nuts. He cut 5 trees damaged in a storm into logs. He had five logs 10 feet long with a 28-inch diameter at the small end and three logs 14 feet long with a 20-inch diameter at the small end. He used Doyle log rule to find approximate board feet of usable lumber in the logs.

Doyle log rule formula:

Where: BF is the approximate board feet of usable lumber in a log.
d is the diameter of the small end of the log, in.
l is the length of the log, ft.

Trades & Technology

Rigid-frame construction permits very ____________________ roof spans

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

What were the essential components of George W. Bush's conservative domestic policies? How were they related to the Bush administration's foreign policy?

What will be an ideal response?

Trades & Technology

Two technicians are discussing transmissions. Technician A says that automatic transmissions utilize hydraulics and valves to operate the transmission. Technician B says that automatic transmissions have a mechanical connection to the engine at all times. Who is correct?

A. A only B. B only C. Both A and B D. Neither A nor B

Trades & Technology