Technician A says backfiring will occur if the distributor is installed 180° off. Technician B says a rebuilt engine should not be run at idle speed for the first few minutes after it is started. Who is right?
A. Technician A
B. Technician B
C. Both technicians
D. Neither technician
Answer: C
You might also like to view...
The inside diameter of an incinerator’s smokestack is 0.5 m. The flow rate of ventilation air emitted through the stack is 0.1 m3/s at 800?C. The exhaust exists the stack into an atmosphere with a 3 m/s average wind speed and an ambient temperature of 23?C at the stack exit. Determine the effective stack height for a 10-m-high smokestack given the following additional information:
a. Ground-level temperature, T = 23.2 b. Ground-level temperature, T = 23.0 c. Ground-level temperature, T = 22.0 What will be an ideal response?
In metal fabrication, the assembling step corresponds to the process of ____.
A. removing all of the unwanted material around the laid-out part B. drawing lines on the raw metal stock according to the parts drawings and specifications C. permanently attaching the parts together to form the finished part D. placing all the parts together in the correct location and orientation with each other
The output of a NAND gate is low when an input is low
Indicate whether the statement is true or false
The circumference of a circle is 37 centimeters. What is the diameter to the nearest thousandth centimeter?
A. 10.444 B. 10.555 C. 11.777 D. 11.888