When stripping conductors, be sure to _____.
a. make a chisel point on the conductor end
b. retwist and tighten the wire strands
c. cut the insulation so that no frayed pieces or threads extend past the point of cutoff
d. use cutting tools with jaws that butt against each other
c. cut the insulation so that no frayed pieces or threads extend past the point of cutoff
You might also like to view...
Which type of fuel injector has a relatively high current applied to quickly open the pintle, and then the current is reduced to lower level.
A. Peak and hold injectors B. Pulse width modulated injectors C. Duty cycled injectors D. High side driver injectors
The expected weight of an installed cable tray system is 300 pounds. Each support must be capable of carrying _____.
a. 300 lbs b. 375 lbs c. 450 lbs d. 600 lbs
A pesticide is to be applied at the rate of 2 ounces per 1,000 ft.2 . How many gallons are needed to treat 256,000 ft.2?
What will be an ideal response?
An increased pressure will change some ____________________(liquids, gases) into ____________________ (liquids, gases).
Fill in the blank(s) with the appropriate word(s).