Which lining does most of the braking on a dual-servo brake?
A) Both contribute equally B) Front (forward facing)
C) Rear (rearward facing) D) Depends on the speed of the vehicle
C
You might also like to view...
The small space between each piston ring and the inner side of its groove is called ____.
a. piston ring height clearance c. piston ring strap clearance b. piston ring valve clearance d. piston ring side clearance
Hard-drawn copper tubing is harder than soft tubing because _____.
a. it has been annealed b. it has other metals combined with the copper c. of the drawing process used to manufacture it d. it has been through a special tempering process after forming
How are most superchargers lubricated?
A) By greased bearings B) By an internal oil reservoir C) By engine oil under pressure through lines from the engine D) No lubrication is needed because the incoming air cools the supercharger.
For a long-run gable roof, it is recommended that you start in the center rather than at one end or the other
because _____. a. this provides a slight slope from the center to help drain excess water from the roof b. there is less chance of misalignment in both directions c. composition shingles must be overlapped from side to side, starting from a center shingle d. you cannot accurately measure the space between courses on the ends of the roof