Give an example of how GDT could be used as both a design and inspection tool
What will be an ideal response?
Any number of parts may be identified as to being manufactured to a specific design and then using a specific measuring tool ensure it falls within the limits specified by the GDT. An example is the bolt of an M-14 rifle.
You might also like to view...
____ is somewhat affected by cleanliness, requiring little preweld cleaning.
A. Mild steel B. Aluminum C. Stainless steel D. Low carbon steel
The infrared humidifier consists of a horizontal water reservoir and infrared lamps with _____
a. plates b. a sponge c. reflectors d. heaters
Which of the following is a primary characteristic of the data lock-out flip-flop?
A) Data is only clocked into the FF on the clock transition. B) Data can only be entered when the clock is high. C) Data cannot be entered into the FF unless the EN line is high. D) The master section is a pulse triggered type FF.
Technician A states in a CR system the desired rail pressure is monitored by the rail pressure sensor. Technician B states in a CR system actual rail pressure is calculated by the PCM. Who is correct?
A. Technician A only. B. Technician B only. C. Both A and B. D. Neither A nor B.