The physical cable used to connect Ethernet LANs varies depending on all of the following except:
A) level of maintenance required
B) number of devices connecting to the network
C) structure of the building or buildings
D) distance the signal has to travel
E) amount of traffic expected
A
You might also like to view...
Asphalt shingles are provided with a self-sealing adhesive line along the entire length of a shingle and about half-way through its width, which bonds the overlying shingle with the shingles immediately below. In addition to the adhesive line, what other form anchorage is providing in an asphalt shingle roof?
What will be an ideal response?
How are medicine and ecology related to agriculture?
What will be an ideal response?
While having a discussion, Technician A says that most solenoids are mounted on the top of the starter motor. Technician B says some solenoids are mounted in a remote location. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
Answer the following statement(s) true (T) or false (F)
1. A diac can be unidirectional or bidirectional. 2. The operation of the diac is very different to that of a unijunction transistor. 3. There are three schematic symbols for the diac. 4. When voltage is applied to the diac, it will remain in the turned-off state until the applied voltage reaches a predetermined level. 5. The break-back voltage of the SBS is more pronounced than that of the diac.