Using the series circuit in question #4, confi rm that the voltage across each 100-ohm resistor will be 5 V.
What will be an ideal response?
V = IR; V = 0.05 A X 100 ? = 5 V
You might also like to view...
Why is the compressor started in the 2nd part of a triple evacuation?
a. To make sure all the refrigerant has been removed from the system. b. To pull air trapped in the system back into the crankcase. c. To release any moisture trapped in the oil.
When a line duty overload protecting a motor detects an overload, it:
A) Contacts the air conditioning service company using a dedicated communication link. B) Breaks the circuit to the coil of the contactor controlling the motor. C) Breaks the line voltage to the motor. D) Breaks the power line to the house.
Solve the following problem and if necessary round answer to two decimal place: .
What will be an ideal response?
All of the following sensors vary resistance so as to modify a voltage signal EXCEPT:
A. Potentiometer B. NTC Thermistor C. Zirconium dioxide oxygen sensor D. Piezoresistive diaphragm