The proper way to discharge a capacitor is to:
A) Apply 230 V to the terminals for a short period of time.
B) Short across the terminals with a large, insulated screwdriver.
C) Connect a jumper wire across the terminals.
D) Connect a bleed resistor across the terminals.
D
You might also like to view...
Why is it considered ideal for converters without studs to be only 1/8" from the flexplate when pushed as far as possible into the transmission?
What will be an ideal response?
_____ is direction of workers in a manner that brings out their best efforts and attitudes on behalf of the business
A) Customer relations B) Personnel management C) Human relations D) Good leadership
The three types of ADCs that do not use a DAC as part of the conversion process are:
A) digital-ramp ADC, tracking ADC, and dual-slope ADC. B) flash ADC, voltage-to-frequency ADC, and dual-slope ADC. C) flash ADC, digital-ramp ADC, and dual-slope ADC. D) successive-approximation ADC, digital-ramp ADC, and dual-slope ADC.
The requirement that toilets must use no more than 1.6 gallons of water per flush is mandated by the _____
a. Americans with Disabilities Act b. Conservation of Power and Water Resources Act c. National Standard Plumbing Code d. local applicable code