When driving wood screws in hardwood, it is usually necessary to _____.
a. apply considerable torque
b. use a power screwdriver
c. drill a pilot hole
d. recess the screw head
Answer: C
Trades & Technology
You might also like to view...
Phosphorus is found in nature in the form of phosphate rock
Indicate whether the statement is true or false
Trades & Technology
An acceptable charging circuit voltage on a 12 volt system is __________
A) 13.5 to 15 volts B) 14.9 to 16.1 volts C) 12.6 to 15.6 volts D) 12 to 14 volts
Trades & Technology
__________ is commonly used by architicets to describe special treatment.
A. Freehand B. Poché C. Crosshatching
Trades & Technology
The typical motion control trapezoid profile shows that during acceleration or deceleration, the torque produced by the actuator is __________.
A. minimum B. maximum C. moderate
Trades & Technology