What term describes the rotational speed at which an object begins to vibrate as it turns?
A. rotation
B. vibration
C. critical speed
D. vibrational speed
Answer: C
You might also like to view...
What are the two different kinds of CHP systems?
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1. Where inch dimensions are less than one, a zero precedes the decimal. 2. Fraction dimensions generally represent a larger tolerance than decimal dimensions. 3. A properly dimensioned print places the smallest dimensions closest to the object and the progressively larger dimensions outward from the object. 4. It is possible in CAD/CAM/CIM to make a print on the computer screen and send the information directly to the computer numerical control machine tool without generating a hard copy or print of the print.
Drill bits for iron and steel are properly ground to a _____ degree angle.
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1. The National Standard Plumbing Code requires the water distribution system to be sized for a maximum velocity of 12 feet per second at the design flow rate. 2. Curb valves are located at the termination of the water service and provide isolation safety and maintenance capabilities for a structure. 3. Codes state that the maximum allowable pressure in a structure shall be limited to 80 psi under static conditions (no flow). 4. Riser valves are required when water lines pass through more than one floor. 5. Gray water systems shall never be connected to the water distribution system regardless of the degree of treatment.