Technician A says that alignment sensor calibration is needed to compensate for bent wheels. Technician B says that sensor calibration is needed to compensate for uneven installation of the sensor on the wheel. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
C
You might also like to view...
A five-speed transmission is in third gear. Which is correct?
A) The 1-2 synchronizer is centered B) The 3-4 synchronizer is moved to engage third gear C) Both A and B D) Neither A nor B
___________ is (are) the product of voltage and current
A. Series resistance B. Meter movement C. Power D. Circuits
Some manufacturers claim that more than ________ of the harvested wood fiber becomes part of a finished product
A) 90% B) 60% C) 25% D) 82%
Balanced port TX valves are used to ____.
A. feed refrigerant at a normal rate with low condenser entering air temperatures B. feed refrigerant at a normal rate with high condenser entering air temperatures C. stop refrigerant flow with high condenser entering air temperatures D. stop refrigerant flow with low condenser entering air temperatures