Two technicians are discussing the machining of brake drums. Technician A says that most brake drums cannot be machined more than 0.060 in. oversize. Technician B says that brake drums on a common axle should be machined to within 0.035 in. of each other. Which technician is correct?

A) Technician A only B) Technician B only
C) Both Technicians A and B D) Neither Technician A nor B


A

Trades & Technology

You might also like to view...

The inside diameter of a building exhaust smokestack is 2.0 m. The flow rate of ventilation air emitted through the stack is 10 m3/s at 25°C. The exhaust exits the stack into an atmosphere with a 3 m/s average wind speed and an ambient temperature of 21°C. Determine the effective stack height for a 30m-high smokestack under the stability conditions calculated in 5.37 as assigned by your instructor.

What will be an ideal response?

Trades & Technology

Which is the most difficult to digest in the ration?

a. protein c. fiber b. fats d. vitamins

Trades & Technology

Two technicians are discussing air shocks. Technician A says that air is forced through small holes to dampen the ride. Technician B says that air shocks are conventional hydraulic shock absorbers with an airbag to control vehicle ride height. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians D) Neither technician

Trades & Technology

Technician A says that wet asbestos is known as hazardous waste. Technician B says that dry asbestos is known as solid waste. Which technician is correct?

A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B

Trades & Technology