What is the height of a stud when the building has a 1/2" sheetrock ceiling, a 5/8" underlayment, a 3/4"
subfloor, and an 8' ceiling height?
a) 91-1/4"
b) 92-3/4"
c) 92-5/8"
d) 93"
c
You might also like to view...
Because the provision of static joints adds to the stresses on a component, requiring a larger cross section, which increases the cost of the component, should the static joints be avoided? Explain.
What will be an ideal response?
Which population groups have a greater risk of developing severe complications from zoonotic disease?
What will be an ideal response?
The subsequent problems deal with the circuit below. Assume that when the transistor is in saturation, the collector-to-emitter drop is 0.2 V and the base-to-emitter forward bias voltage is 0.7 V. Assume that the forward bias voltage for the LED is 2 V.
If Vin=0V, what is the voltage at the base of the transistor?
A. 5 V B. 4.3 V C. 0.7 V D. 0.2 V E. 0 V
Identify three features that can be found at the ends of dimension lines.
What will be an ideal response?