When removing cylinder heads, the fasteners should be removed in what order?
A) All fasteners loosened slightly in the same order as the tightening sequence and then removed in any order
B) The same order as the specified tightening sequence
C) Any order
D) The reverse order of tightening
D
You might also like to view...
____________________ losses traditionally made up about 66% of the power losses in the I2R losses of the stator windings.
Fill in the blank(s) with the appropriate word(s).
Technician A says that a defective PCV valve could cause excessive crankcase pressure. Technician B says that a defective PCV valve could cause an oil leak. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
What factor has an impact on cooling tower performance?
A) Ambient air temperature
B) Relative humidity of ambient air
C) Cooling tower design
D) All of the above
Openings in the roof used to bring additional daylight into a room and let natural light enter an interior room are known as _____.
A. fanlights B. skylights C. picture windows D. hearths