Describe the construction of a planetary gearset.
What will be an ideal response?
A simple planetary gearset is made up of three gears. In the center of the gearset is the sun gear. All other gears in the set revolve around the sun gear. Meshing with the sun gear are three or four planetary pinion gears. The pinions are held together by the planetary pinion carrier or the planetary carrier. The carrier holds the gears in place while allowing them to rotate around their shafts. On the outside of the planetary pinions is the ring gear. The ring gear has teeth around its inside circumference that mesh with the teeth of the planetary pinions. The carrier assembly and the sun gear are mounted on their own shafts.
You might also like to view...
In a suspension bridge, which member(s) is (are) in compression?
A) Hanger cables B) Support pylons C) Suspension cable D) Both suspension cable and hanger cables E) None of the above
The subsequent problems deal with the improved integrator circuit shown below, where: R1 = R2 = Rs = R.
The voltage at the inverting input of the op amp is always
A. Vin ? Vout B. Vout C. 2Vin D. Vin / 2 E. 0 V
Why is the shortgrass prairie so well suited to livestock production?
What will be an ideal response?
The rain sense module (RSM) can turn on the wipers by communicating with the _________
A) Wiper motor B) Instrument cluster C) BCM D) PCM