Answer the following statement(s) true (T) or false (F)
1. When working with similar DWV piping materials made from copper, connections shall be made with referenced standards by brazed joints only and require an elastomeric seal.
2. Water-supply materials, by code, shall conform to NSF 61.
3. According to the IPC, hot poured bituminous joints are prohibited with both DWV and water connections.
4. The major function of an interceptor is to stop and accumulate unwanted materials in the drainage system.
5. The best defense against failed connections, resulting in damage and possible legal action, is adherence to code requirements
1. False.
2. True.
3. True.
4. True.
5. True.
You might also like to view...
What is the material that breaks water into smaller droplets as it falls inside the cooling tower, creating greater surface exposure area?
A) Fill B) Fan C) Drift eliminator D) Makeup water
Una carga debe tener _____ horas o más de funcionamiento sin interrupción para que se la considere continua.
a. 3 b. 10 c. 12 d. 24
What should be done to a tire on a truck when its pressure is tested to be less than 50 psi of its specified value?
A. Inflate it to specification on the truck B. Remove the tire, and place it in a safety cage for assessment C. Discard the tire and replace with a new one D. Locate the leak and insert a plug
Which of the following will cause pulsation in the brake pedal when the brakes are applied?
A. loose lining B. grease on linings C. out-of-round drum D. All of the above