Which conventional steering gear adjustment should be the first performed?
A) Worm bearing preload
B) Gear mesh adjustment
C) Sector shaft end play
D) Tolerance adjustment
A
You might also like to view...
Which of the following is true of the voltage rating of a fuse?
a. It can be lower than the circuit voltage but never higher. b. It can be higher than the circuit voltage but never lower. c. It is always the same as the circuit voltage. d. It depends upon its capability to close a circuit under an overcurrent condition.
Two technicians are discussing jump starting a hybrid electric vehicle. Technician A says that the
high-voltage batteries can be jumped on some HEV models. Technician B says that the 12-volt auxillary battery can be jumped using a conventional jump box or jumper cable. Which technician is correct? A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
If a basic one-loop, dc generator rotates at 60 revolutions each second, how many times each second does its dc output voltage reach a peak value?
A) 60 B) 120 C) 240 D) 0
Root-mean square (RMS) is a mathematical formula for:
A) Determining the price of a replacement compressor. B) Calculating the electrical power passing through a alternating current circuit. C) Measuring the pressure drop across an air filter. D) Determining the physical resistance of an AC motor.