The site location plan shows the following.
A. location of all doors
B. location and dimensions of the building
C. location of all service utilities
D. location of service utilities
Answer: A
You might also like to view...
Conductors that become too hot ____________
A) Could be the result of a short to ground before the load B) Create excessive resistance C) Both A and B D) Neither A nor B
Which media is best to use for cleaning parts, as it does not need to be thoroughly cleaned after using?
A) Aluminum shot B) Baking soda C) Glass beads D) Stainless steel shot
A standard right hand toolholder is best for turning:
A) Small diameter workpieces B) Close to the tailstock C) For heavy cutting D) Close the headstock
You have been asked to manufacture a wiring junction box for connecting electrical wires in a fighter aircraft. The box sits under the pilot's seat and is part of the seat ejection system. Sufficient forces are exerted on the box that it must be made of a composite material using intermediate to long fibers. What fiber, matrix, and manufacturing method would you use for this part, and why?
What will be an ideal response?