When the ohmmeter test leads are connected to two terminals of a switch, the meter reads 0 ohms. What does this indicate?
A. No continuity between the terminals
B. High resistance between the two terminals
C. Continuity between the two terminals
D. Ohmmeter battery is low
Answer: C
You might also like to view...
Calculate the total diameter of the TFN conductors.
You have a Rigid PVC conduit (RNC), schedule 80, that is required to hold the following conductors; six -18AWG TFN, ten -18AWG XFF and four -16AWG XF.
Give a general five-step procedure for creating an auxiliary view showing an inclined surface in true size and shape.
What will be an ideal response?
The term MEP is an acronym for
A) mechanical and electrical plans. B) mechanical and electrical plant. C) mechanical, electrical, and piping. D) municipal emergency plan. E) mechanical, electrical, and plumbing.
Two-part epoxy primers work best on lightly sanded surfaces where a slight-to-moderate amount of filling is required.
Answer the following statement true (T) or false (F)