Where a position tolerance is applied at RFS, what three conditions apply?
What will be an ideal response?
ANS:
Where a position tolerance is applied at RFS:
1. The axis interpretation is used.
2. The axis of the unrelated actual mating envelope must be located within the tolerance zone.
3. The orientation is controlled relative to the primary datum referenced.
You might also like to view...
What is the average value of a pure sinusoidal waveform over one full cycle?
A. At peak B. Zero C. 1 cycle per second D. 250 Hz
The International agreement that established target dates for the phaseout of ozone depleting substances was the:
A) UN Accord. B) Treaty of Versailles. C) International EPA Consortium. D) Montreal Protocol.
If an LC tank circuit is operating below resonance, the circuit is ________ in nature
A) positive B) resistive C) capacitive D) inductive
Kirchhoff?s voltage law states that
A) the algebraic sum of the potential rises and drops around a closed loop is zero. B) the algebraic sum of the individual currents around a closed loop is zero. C) the voltages developed across each element in a series circuit are identical. D) the algebraic sum of the resistances is equal to the sum of the voltages.