When clamping parts with finished surfaces in a bench vise:
A) Soft jaws should be used
B) A cheater should be used on the handle to gain leverage
C) They should be gripped very lightly so that rough jaws will not mar finished surfaces
D) They should be gripped very lightly so the smooth surface will not cause it to slip out of the jaws
A
You might also like to view...
The Wild AC is full of harmonics and ____.
a. cannot be used directly b. should be transposed c. must be allocated d. cannot be identified
Which of the following ESTs do most truck engine manufacturers recommend to diagnose and reprogram their ECMs?
A. scan tools B. handheld ESTs C. Nexiq iQ D. PCs with Windows-based OEM software
Technician Asays in most electromagnetic gauges, if the sending unit resistance is low, the gauge will read low. Technician B says in most bimetallic gauges, if the sending unit resistance is low, the gauge will read high. Who is correct?
A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B
Which refrigerant has the lowest global warming potential (GWP)?
A) R-744 B) R-134a C) R-1234yf D) R-12