There are standards for specifying particular types of geometry. For example, circles are typically dimensioned as ____________________, and arcs are dimensioned as radii.
Fill in the blank(s) with the appropriate word(s).
diameters
You might also like to view...
With the funnellette, the flared part is held in place while the portion sticking through the board is ____________________ to hold it in place.
Fill in the blank(s) with the appropriate word(s).
What is the total current in a parallel resonant circuit if its impedance is 0.22 M?, the Q is 100 and the source voltage is 100 V?
A) 4.55 mA B) 45.5 mA C) 0.0455 mA D) 0.455 mA
It is only possible to go in the forward direction when a jump command is used.
Answer the following statement true (T) or false (F)
In a welded wire fabric mat that has a designation of 8 × 8-D4.0 × 4.0, the number 4.0 indicates that the wires are
A) deformed wires, each with a cross-sectional area of 4.0 in.2. B) deformed wires, each with a diameter of 4.0 mil. C) deformed wires, each with a diameter of 0.04 in. D) deformed wires, each with a cross-sectional area of 0.04 in.2. E) deformed wires, each with a cross-sectional area of 0.4 in.2.