The ____ protective device is determined by multiplying the rated-load current, or the branch-circuit selection current of the hermetic refrigerant motor-compressor, by 225 percent and then adding all concurrent loads such as electric heaters, motors, and so on.
A. branch-circuit
B. rated-load
C. maximum continuous current
D. maximum overcurrent
Answer: D
You might also like to view...
Drawing eave vents is similar to drawing shutters.
Answer the following statement true (T) or false (F)
Three-wire control circuit components may be either maintained contact or momentary contact, but the _______________ contact function is specific to three-wire control.
Fill in the blank(s) with the appropriate word(s).
Define annealing.
What will be an ideal response?
Answer the following statement(s) true (T) or false (F)
1. An operational amplifier can be used as an oscillator. 2. The operational amplifier circuit depends on a slight imbalance in the op amp or random circuit noise to start the oscillator. 3. A voltage difference of only a few hundred millivolts is all that is needed to make the output of the amplifier go high or low. 4. If the oscilloscope is connected to a pulse generator, the positive pulse is much longer than the negative pulse. 5. The 741 operational amplifier can easily be changed from a square-wave oscillator to a pulse generator.