Which of the following can be caused by cross connection of hoses?
A. Piping failure
B. Leaking piping
C. Stress cracking
D. Equipment damage
A. Incorrect. Equipment damage can be caused by the cross connection of hoses.
B. Incorrect. Equipment damage can be caused by the cross connection of hoses.
C. Incorrect. Equipment damage can be caused by the cross connection of hoses.
D. Correct. Equipment damage can be caused by the cross connection of hoses.
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. A packaged unit schematic typically contains separate references for the air conditioning compressor and condenser fan. 2. In the cooling cycle of a packaged unit, the indoor blower fan is controlled by the fan switch. 3. Most door interlock switches are designed so that they are actually a two-position switch. 4. In troubleshooting for electronic circuit boards, if the inputs and outputs are correct, the problem probably lies somewhere within the circuit board. 5. The compressor lock-out relay can operate only when the thermostat is set in the heating mode.
A doctor is on contract to a medium-sized oil company to provide medical services at remotely located, widely separated refineries. The doctor is considering the purchase of a private plane to reduce the total travel time between refineries. The doctor can buy a used Learjet 31A now for $1.1 million or wait for a new very light jet (VLJ) that will be available 3 years from now. The cost of the VLJ will be $2.1 million, payable when the plane is delivered in 3 years. The doctor has asked you, his friend, to determine the present worth of the VLJ so that he can decide to buy the used Learjet now or wait for the VLJ. The MARR is 15% per year and the inflation rate is projected to be 3% per year. (a) What is the present worth of the VLJ with inflation considered? (b) Which plane
should he buy? What will be an ideal response?
Marketing contracts are entered into after the crop is harvested
Indicate whether the statement is true or false
The distance an RF signal can be transmitted and received is determined by the ____.
A. transmitter's wattage B. style of the receiver's antenna C. height of the transmitter and receiver's antenna D. All of the above