What should you do to verify valve position?
A) Make sure there are no leaks
B) Examine the valve for excessive wear
C) Check that the correct type valve is used in the correct way
D) Make sure the valve stems are properly lubricated
Answer: C
Explanation: A) Incorrect. To verify the valve position, check that the correct type valve is used in the correct way.
B) Incorrect. To verify the valve position, check that the correct type valve is used in the correct way.
C) Correct. To verify the valve position, check that the correct type valve is used in the correct way.
D) Incorrect. To verify the valve position, check that the correct type valve is used in the correct way.
You might also like to view...
What are five environmental factors that must be considered when growing plants in the greenhouse?
What will be an ideal response?
_____ is a chemical that is specifically meant for small, hairlike worms
A) ?Dasanit B) Nemagon? C) ?Both a and b D) Neither a nor b
In 2009, the Office of the Under Secretary of Defense projected that a critical International Defense Construction Cost Index would increase from its value then of 3423 to 4098 in 2016. If the actual value in 2016 was 5167, (a) what was the actual building cost inflation rate between 2009 and 2016, and (b) what was the increase in the inflation rates between projected and actual?
What will be an ideal response?
A contractor is likely to select and use a specific form system whenever possible because _____
a. crews are trained in its use b. it is the most expensive c. it is readily available d. contracts require use of that system