The NEC® article that covers equipment grounding and equipment grounding conductors is _____.
a. NEC Article 250
b. NEC Article 340
c. NEC Article 680
d. NEC Article 725
a. NEC Article 250
You might also like to view...
Answer the following statements true (T) or false (F)
In a three:right viewport configuration, all three viewports are in parallel projection.
Before checking the fluid level in a manual transmission or transaxle, what should the technician do?
A) Loosen the fluid fill hole plug B) Check service information for the specified procedure C) Check for the specified fluid type and viscosity D) All of the above
Answer the following statement(s) true (T) or false (F)
1. The overload unit contacts are connected in parallel with the motor starter contactor unit control coil. 2. Electronic type of thermal overload units are adjustable for a range of motor load currents, and are set for the full load amperes (FLA) of the specific motor load. 3. When the melting alloy is a solid, the shaft of the ratchet wheel is held from turning. 4. When the bimetallic strip is heated, the metal with the lower thermal expansion characteristic will become longer, and cause the metal strip to bend.
Diseconomies of scale correlate with more quantities produced than economies of scale.
Answer the following statement true (T) or false (F)