Soldering uses heat and a(n) _____ filler metal.
a. ferrous
b. nonferrous
c. stainless
d. iron
b. nonferrous
You might also like to view...
If an R134a system has suction pressure of 20 psig and a suction line temperature of 46° the evaporator is _____________.
a. Flooding b. Starving c. Operating properly d. Need more information
When pressure testing a hydraulic assisted power steering system, the highest pressures were greater than 50 psi of each other. This indicates a problem with ________
A) The pump rotor B) The flow control valve C) The pump vanes D) A defective hose
Which alignment angle is adjustable on all vehicles?
A) SAI (KPI) B) Camber C) Caster D) Toe
Structural CAD technicians prepare original engineering and shop drawings based on raw data that may be supplied by a number of different sources. Which of the following identifies four common sources?
A. Architects, engineers, CAD managers, and sales personnel B. Drafting clerks, senior CAD technicians, contractors, and sales personnel C. Architects, engineers, checkers, and sales personnel D. Architects, engineers, contractors, and sales personnel