Which of the following is true with regard to working near cranes?
a. Personnel may be moved to upper levels using lift equipment as long as they are secured
to a safety lanyard.
b. You may walk under a load as long as you move quickly.
c. Additional weights can be used to secure a crane in order to temporarily exceed its lift
capacity.
d. Only individuals trained in rigging should ever rig material for a lift.
d. Only individuals trained in rigging should ever rig material for a lift.
You might also like to view...
What is the difference between the recovery time objective and the recovery point objective?
What will be an ideal response?
When driving wood screws in hardwood, it is usually necessary to _____.
a. apply considerable torque b. use a power screwdriver c. drill a pilot hole d. recess the screw head
The DBC-7 ABS provides all of the following EXCEPT:
A. programming for dynamic rear proportioning. B. tire inflation monitoring system. C. it provides codes in text message format. D. enhanced traction system and traction control system.
An IAT is being tested. After the vehicle has been allowed to cool for several hours, a scan tool is used to observe the IAT sensor reading. When compared to the engine coolant temperature (ECT), the two temperatures should be within how many degrees F of each other:
A) 10 B) 25 C) 5 D) 15