The elastomer bellows spring has a _____ that fits over the shaft and pushes against the elastomer bellows
a. metal bellows
b. special fitted collar
c. single-coil spring
d. secondary seal face
c
You might also like to view...
If the molten weld pool is large and fluid, use a C or J ____________________ to allow a longer time for the molten weld pool to cool.
Fill in the blank(s) with the appropriate word(s).
?For a visual inspection of a pipe weld, what is the acceptable discontinuity for incomplete fusion?
A. ?1/32 in. (0.8 mm) B. ?1/16 in. (1.6 mm) C. ?3/32 in. (2.4 mm) D. ?None allowed
A cylinder power balance test is performed. Cylinders 1, 2, and 3, all drop 175 RPM when disabled with a scan tool. Cylinder 4 drops 50 RPM when disabled. The following statements are all correct EXCEPT ________
A) This test could also be conducted by grounding the plug wire for each cylinder. B) Cylinder 4 is much weaker than 1, 2, and 3. C) Cylinder 4 is much stronger than 1, 2, and 3. D) There may be a mechanical problem with cylinder 4.
All of the following are elements of manufacturing lead time EXCEPT:
A) setup time. B) design time. C) move time. D) run time. E) wait time.