Answer the following statement(s) true (T) or false (F)
The gas must be turned off for the portion of the fuel gas piping system that is to be worked on.
ANSWER: True
You might also like to view...
Two technicians are discussing the reason that the brake fluid level in the master cylinder drops. Technician A says that it may be normal due to the wear of the disc brake pads. Technician B says that a low brake fluid level may indicate a hydraulic leak somewhere in the system. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
When checking to make sure a circuit is de-energized, you should test:
A) Between any two possible voltage points. B) By spitting on the contact to see if it sizzles. C) Voltage to ground. D) With a slight touch of the back of your hand.
VCC = 12 volts, RC = 1k, determine the load line IC and VCE intercepts
A) IC = IB = 12mA and VCE = 12m volts B) IC = 1.2mA and VCE = 12m volts C) IC = 12mA and VCE = 12 volts D) IC = .012mA and VCE = 1.2 volts
Which spring type has only one point of contact?
A. plain open end B. plain closed end C. ground open end D. ground closed end