To obtain an accurate reading of a fluid in a large pipe, a technician should ____.
A. strap a dial-type pocket thermometer to the pipe
B. use a digital thermometer in a glass of ice water
C. use a permanently mounted thermometer in a well
D. Any of the above will work fine.
Answer: C
You might also like to view...
What is the primary function of a compressor?
A) Regulate the pressure of gases for use in a facility B) Increase the pressure of gases for use in a facility C) Decrease the pressure of gases for use in a facility D) Expand gases for use in a facility
Contour farming helps to prevent ____________________
Fill in the blank(s) with correct word
Half barrel–shaped greenhouses called ____________________ are used by most modern nurseries
Fill in the blank(s) with correct word
The maximum safe level to pressurize a system with nitrogen when checking for leaks is:
A) The high-side system test pressure. B) 500 psig. C) A pressure equal to the saturation pressure at 150°F for the system refrigerant. D) The low-side system test pressure.