As the speed of the wheel speed sensor signal increases, so does its frequency
Indicate whether the statement is true or false
TRUE
You might also like to view...
PROBLEM 2.29
A homogeneous cable of length L and uniform cross section is suspended from one end. (a) Denoting by ? the density (mass per unit volume) of the cable and by E its modulus of elasticity, determine the elongation of the cable due to its own weight. (b) Show that the same elongation would be obtained if the cable were horizontal and if a force equal to half of its weight were applied at each end.
The compressor in an existing split system is being replaced. The system has a 35 ft line set. The factory charge for the condensing unit is 80 oz. The installation instructions state that the factory charge assumes a line length of 15 ft and gives the per-ft adjustment as 0.6 oz per foot. How much refrigerant should be added to the system after the system has been evacuated?
A) (35 — 15 ) × 0.6 = 12 oz B) 80 oz + (35 × 0.6 ) = 101 oz C) 80 oz D) 80 oz + ((35 — 15 ) × 0.6 ) = 92 oz
Carry the answer to four decimal places. If X = 0.9875 inch and Y = 0.675 inch, find W.
Fill in the blank(s) with the appropriate word(s).
When a power tool has a set of bearings, a tool that uses which of the following styles of bearings should be selected?
A) Circular bearings B) Roller bearings C) Sleeve bearings D) Ball bearings