If a wire repair, such as repairs made under the hood or under the vehicle is exposed to the elements, which type repair should be used?
A) Rosin-core solder and electrical tape
B) Wire nuts and electrical tape
C) Solder and adhesive-lined heat shrink or crimp and seal connectors
D) Butt connectors
C
You might also like to view...
Figure 41-02
In the accompanying figure, because control relay CR is used as a(n) ____________________, it must be permitted to remain energized when either or both of the motor starters are not energized.
Fill in the blank(s) with the appropriate word(s).
The relay logic and truth table shown in Figure 4 represents a(n) _____.
a. AND function
b. OR function
c. NOR function
d. NAND function
Use a(n) _____ to measure bearing clearance when installing a spherical roller bearing
A) feeler gauge B) dial bore gauge C) vernier caliper D) inside micrometer
The Celsius scale is based on water boiling at a sea level temperature of _____
a. 100° b. 180° c. 212° d. 265°