Answer the following statement(s) true (T) or false (F)
1. With variable torque loads, the torque varies as the square of the speed.
2. The electronic shear pin reacts to the amount—and rate —of current increase to the motor.
3. The half-wave rectifier circuit requires two diodes and the use of a center-tapped secondary AC transformer.
4. In a three-phase rectifier system, the DC level remains high and the ripple percentage is very low; therefore, the DC supply needs very little filtering.
5. The armature power is typically controlled by an SCR that is turned on at different points in the waveform to adjust the voltage to the motor armature to control the speed.
1. TRUE
2. TRUE
3. FALSE
4. TRUE
5. TRUE
You might also like to view...
List three hazards of cold.
What will be an ideal response?
One billion grams is called a ____________________
Fill in the blank(s) with correct word
The hip rafters are never made of wider lumber than the common rafters and jack rafters.
Answer the following statement true (T) or false (F)
Which SA on a J1939 chassis data bus is assigned to the transmission electronics?
A. 00 B. 03 C. 01 D. 08