When performing a cylinder leakage test, the following statements are all correct EXCEPT ________
A) Bubbles in the coolant may indicate a defective head gasket
B) Air heard escaping through the tailpipe may indicate a defective exhaust valve
C) Shop air should be applied to the dipstick tube
D) Shop air should be applied through the spark plug hole
C
You might also like to view...
The partial pressure of oxygen in the atmosphere is 0.21 bar and that of nitrogen 0.78. Which of the following partial pressure levels would you expect to find in the pores of a moderately well-drained soil?
A) 0.15 (oxygen) B) 0.21 (oxygen) C) 0.50 (nitrogen) D) 0.30 (oxygen) E) 0.80 (nitrogen)
In this diagram, what would happen if the ground (red arrow) was disconnected?
A) Windows would not work at all B) Only one motor would work C) Windows would work from the master control only D) Windows would operate slowly
Which of the following statements about intersystem bonding is correct?
A. Intersystem bonding is required at the service equipment but is optional at buildings supplied by a feeder. B. Intersystem bonding is optional at the service equipment but is required at buildings supplied by a feeder. C. Intersystem bonding is required at the service equipment and at buildings supplied by a feeder as well. D. Intersystem bonding is required at the main distribution for mobile home parks but is not required at the disconnecting means at the mobile home.
Give this thread specification: 3/8-24 UNF-3A MOD (21) MAJOR DIA .3648-.3720 MOD, describe the meaning of the MOD and (21) parts of the note.
What will be an ideal response?