The weep hole on a water pump is located where?
A) Between the bearing and the engine B) Between the impeller and the seal
C) Between the seal and the bearing D) Any of the above, depending on engine
C
You might also like to view...
The metal pads on the substrate surface intended for mounting specific SMC/SMDs are called the ____________________.
Fill in the blank(s) with the appropriate word(s).
A piece of copper bus bar is 0.75 millimeter by 100 millimeters in cross section. What is the cross-sectional area in square centimeters? Carry the answer to two decimal places.
Fill in the blank(s) with the appropriate word(s).
After mortar has been mixed, its is transferred from the box to the wheelbarrow with a _____ .
A. dirt shovel B. large hoe C. large trowel D. square-bladed shovel
The requirement for an equipment owner to repair a significant refrigerant leak within 30 days can be
waived if the owner _____. a. submits a plan for replacing the unit within one year b. submits a plan for replacing the unit within 180 days c. writes a letter explaining that the leak rate is only 50 percent of the charge per year d. writes a letter explaining that the refrigerant in use is an HFC