Explain how to connect the traveler wires to a four-way switch in a typical circuit where a lamp is controlled from any one of three switching points.
What will be an ideal response?
Care must be used in connecting the traveler wires to the proper terminals of the four-way switch. Always make sure that the two traveler wires from one three-way switch are connected to the two terminals on one side of the four-way switch while the two traveler wires from the other three-way switch connect to the two terminals on the other side of the four-way switch.
You might also like to view...
Wetted asbestos is considered to be ________.
A) Poisonous B) Solid waste C) Toxic D) Hazardous waste
A ________ is used to seal the opening for the compressor drive shaft.
A) Seal cartridge B) Lip seal C) Either A or B D) Neither A nor B
This is the part size as measured after production.
a. actual size b. allowance c. basic dimension d. feature
Failed compressors never deposit debris into the compressor inlet or discharge lines.
A. True B. False