Party walls are often required to have double thicknesses of ____ on each side.
A. plywood
B. gypsum wallboard
C. paint
D. caulking
Answer: B
You might also like to view...
What is the basic function of a thermostat?
What will be an ideal response?
Bundles of shingles and other roofing materials should be placed _____
a. close to the edge of the roof b. directly over rafters or trusses c. between rafters or trusses d. near the ridge of the roof
Why are standard low-efficiency furnaces no longer manufactured?
A) The standing pilot flame safety devices were deemed too hazardous after several technicians were electrocuted while changing a thermocouple. B) Thermocouples proved to be an unreliable technology. C) They cannot provide the minimum 80 percent AFUE required by DOT. D) The thermocouple flame safety devices they use have not been thoroughly field tested.
The cornice is decorative trim placed in the corner where two walls meet. A cornice can be a single shaped wood member, called cove or crown molding.
Answer the following statement true (T) or false (F)