Electronic control of the automatic transmission provides for accurate control of shift ________ and ________.
A. Feel, Quality
B. Smoothness, Feel
C. Timing, Quality
D. Speed, Timing
c) Timing, Quality
You might also like to view...
The term _____ is based on a scale rule that is multiples of the 4" grid called the module.
A. course counter B. modular C. oversize brick D. engineer
A tandem axle trailer equipped with S-cam brakes has all four slack adjusters originally set with a 6-inch dimension from the clevis pin to camshaft. One slack adjuster is replaced, and because of a different hole arrangement in the new slack adjuster, it is set at 61/2 inches. Which of the following is more likely to result?
A. One of the four wheels will lock up ahead of the others under severe braking B. One of the four wheels will lock up behind the others under severe braking C. One of the service brake chambers will require more air pressure than the others D. One of the service brake chambers will require less air pressure than the others
The shaft support shown in the accompanying figure is an example of a machine part that can be sketched easily by ____.
A. reduction B. blocking C. estimating D. inversion
When plate type evaporators are used as shelves, they can be piped together in either a series or parallel configuration.
Answer the following statement true (T) or false (F)