When locating interior walls, what should you do next after using the OFFSET command to assign the wall thickness around the centerline?
A. erase the centerline from the wall
B. determine the wall location on the framing plan
C. use the dimension from the framing plan to locate the center of the wall
D. represent the tops of any required doors and windows
Answer: A
You might also like to view...
Exposures B, C, and D.The design snow load on a roof is a function of
A) wind exposure classification of the site. B) ground snow load of the location. C) roof slope. D) all of the above. E) both A and B.
How many volts are required if the power is 25 watts and the resistance is 64 ohms?
Fill in the blank(s) with the appropriate word(s).
In the accompanying figure, joist headers are positioned ____.
A. uniformly B. in a random fashion C. without regard to the exterior finish D. according to the exterior finish to be used
Find the root of the following number. Round answer to the nearest hundredth as necessary. 
What will be an ideal response?