What factors should you remember when checking for voltage drop in the positive insulated circuit?
What will be an ideal response?
1. Normal voltage drop on the insulated side is between 0.3 and 0.6 volt when normal current is flowing, and 0.1-0.2V on the ground side.
2. Total voltage drop should not exceed 0.6V on a vehicle newer than 2007.
3. A rule of thumb is 0.1V for each connection and 0.2-0.3 volts for the solenoid.
4. Voltage drop will increase as current increases.
You might also like to view...
What should happen before the air pressure in an air brake system tank Falls below 55 PSI
Air brakes
The ultraviolet radiation of the gas flame causes the gas in the fire eye to ____ and conduct electricity.
a. ionize b. fuse c. synthesize d. deactivate
The prosperity that developed in the 1920s
A. was accompanied by a foreboding cloud of consumer debt. B. led to a growing level of savings by the American public. C. enabled labor unions to gain strength. D. was based on a steady and moderate rate of healthy economic growth that did not rely on excessive consumer spending to sustain the prosperity during this decade. E. closed the gap between rich and poor.
A cutting-edge product of Continental Fan had the following net cash flow series (in $1000 units) durÂing its first 5-year period on the market. Find all rate of return values between 0% and 100%.
 FIGURE 1.png)